MAHARSHEE GEOMEMBRANE (INDIA) PVT. LTD. WE BELIEVE IN GREEN EARTH CLEAN EARTH

     Products : Geotextile      What we Offer
 
A permeable, polymetric (synthetics or natural) textile material, in the form of manufactured sheet (which may be woven, non – woven or knitted ) used in geotechnical, environmental, hydraulic and transportation engineering applications.
 

Specification

Woven Geotextile
 

MGIPL WOVEN GEOTEXTILE range is made from Polypropylene (PP) fibers using a precision weaving process. They are characterized by high tensile strengths at low elongation, hence yielding high tensile modulus. These woven geotextiles are dimensionally stable, resistant to Ultra Violet (UV) degradation and are engineered to be mechanically and chemically stable in aggressive soil environments and are also resistant to biological environments normally found in soil.

 
Property

Property

Test Method

MGIPL W100

MGIPL W200

MGIPL W300

Tensile Strength (MD) kN/m

 

IS 1969

28.5

45

57

Tensile Strength (CD) kN/m

26.5

34

42

Elongation (MD) %

30

30

30

Elongation (CD) %

27

27

27

Trapezoid Strength (MD) N

 

ASTM D 4533

320

420

730

Trapezoid Strength (CD) N

320

480

520

Puncture Strength (N)

ASTM D 4833

350

480

620

Apparent Opening Size (mm)

ASTM D4751

0.075

0.075

0.075

Water Permeability (Flow Rate)

ASTM D 4491

9.5 1/m2/s

10 1/m2/s

9.5 1/m2/s

Mass Per Unit Area (gsm)

ADTM D 5261

140

200

240

 

 

 

 

 

 
Specification
Non- Woven Geotextile
 
(PP Nonwoven, Needlepunched)
   Made from: Polypropylene

Mgiplgeo nonwoven geotextiles are manufactured from high quality polypropylene staple fibres. The fibres are mechanically bonded through needle-punching to form a strong, flexible and dimensionally stable fabric structure, with optimum pore sizes and high permeability. The geotextile is resistant to chemicals and biological organisms normally found in soils and is stabilized against degradation due to short-term exposure to ultraviolet radiation. Mgiplgeo nonwoven geotextiles conforms to the following property values.

Properties Standard
Unit
MG
100
MG
150
MG
200
MG
250
MG
300
MG
400
MG
500
MG
600
Mass / Unit Area ASTM D 5261
gms
/ sq.mt
100
150
200
250
300
400
500
600
Thickness ASTM D 5199
mm
1.0
1.3
1.6
1.8
1.9
2.5
2.9
3.4
Tensile Strength ASTM D 4595
kN/m
2.5
4.5
6.5
8
9.5
13
16
19
Elongation  ASTM D 4595
%
55
55
55
55
55
55
55
55
Grab Strength ASTM D 4632
N
300
475
525
700
800
900
1100
1200
Grab Elongation  ASTM D 4632
%
40
40
40
40
40
40
40
40
Trapezoidal ASTM D 4533
N
130
220
265
300
400
500
700
800
Mullen Burst ASTM D 3786
kPa
1000
1655
2100
2600
3180
4050
4700
5500
Puncture Strength (CBR) ASTM D 6241
N
1100
1550
1940
2330
2900
3300
4000
4500
Opening Size ASTM D 4491
microns
110
160
150
150
120
106
70
70
Permittivity ASTM D 4491
Sec
2
2.0
1.8
1.6
1.2
0.7
0.5
0.6
UV Stability @500hrs ASTM D 4355
%
70
70
70
70
70
70
70
70
Roll Dimensions  
Roll Width  
mt
4-6
4-6
4-6
4-6
4-6
4-6
4-6
4-6
 

a PR 15 meets all requirements for a Type III Geotextile as per IRC: SP: 59-2002
b PR 20 meets all requirements for a Type II Geotextile as per IRC: SP: 59-2002
c PR 30 meets all requirements for a Type I Geotextile as per IRC: SP: 59-2002

 

The above values are effective from 01 – 08 – 2009. The values are average roll values in which all the properties are having -10% tolerances. Water Permeability, Elongations are having -30% tolerance and AOS have + 30%. The information given in this data sheet is based on tests conducted at our in-house laboratory and independent accredited laboratories. While the information is presented as a true and accurate representation of the attributes of the products to the best of our knowledge, no expressed or implied warranties are made and Maharshee Geomembrane Pvt. Ltd. assumes no responsibility or liability with regard to the use of this information. The right to make periodic revisions of the specifications without prior notice is reserved.